Edited by Hollyland Forum admin at 2023-9-14 15:06 Welcome to the Hollyland Forum! On behalf of the Hollyland Team, we would like to welcome you to the Hollyland Forum. In this forum you will find great information from other forum members an ...
Hello everyone...I have this MARS T1000 device that does not boot - it turns on and the screen shows the logo...nothing more
Q: Does Solidcom M1 support cascade with ATEM via the talkback port? A: Yes, it does. the 4-wire and talkback ports are in line standard, so the two systems can be cascaded via a customized cable.
Hi all and thanks for reading! The challenge here is to cascade a Syscom 1000T with an RTS ODIN Matrix. Seems simple enough but the 2/4w converter is not converting. I have a sneaking suspicion that there is an RJ-45 to XLR cable that would all ...
1. Hollyland Intercom uses 1.9GHz DECT with AFH (Adaptive frequency hopping) technology, which can be used with other different frequencies such as 2.4GHz or 5GHz wireless devices. However, there may be wireless interference and quantity limitations ...
Q:Can the Solidcom C1 and Solidcom C1 Pro Work Together? Is the ENC Function Still Available?A:The Solidcom C1 Pro is entirely compatible with the Solidcom C1. The firmware version requirements for the Solidcom C1 and Solidcom C1 Pro: Solidcom C1 hu ...
The working principle of the ENC function is as below: Workflows:
Q:How long can one headset work after it Is fully charged?A:Master headset: 5 hours (connected to more than five remote headsets) ,6 hours when remote headsets less than 5 pcs. Remote headset: 10 hours
Connection Diagram Settings [*]Method 1: Connect Solidcom M1 to FreeSpeak II via the 2-wire interface. The key settings are the 2-wire settings on the Solidcom M1 front panel, including input & output gain settings, cable length compensation, and ...
Connection Diagram: Settings [*]Method 1: Connect Solidcom M1 to Clear-Com 702 via the 2-wire interface. The key settings are the 2-wire settings on the Solidcom M1 front panel, including input & output gain settings, cable length compensation, a ...
Q:What should I do if the audio of the beltpack always cuts in and out?A:Turn off the Denoise function in the beltpack settings (this function can be disabled in a quiet working environment).
Q:How many sets Solidcom M1 can work together in the same place in Japan?A:4 sets in maximum at the same place. The installations: a. The distance between two base stations is at least 1.5 meters when multiple Solidcom M1 systems are working togethe ...
Q:How many groups does Solidcom M1 support？ A:Solidcom M1 support 3 groups (A, B, and C) with one base station, if you need more groups, then the base station cascaded by 4W ports would be the best solution for you!
Issue Description: Recently, I've noticed that one of the units in my Solicom C1 PRO Intercom system is experiencing audio quality problems. During conversations, I hear static noise and intermittent drops in audio quality, which makes communication ...
Hello fellow Solicom M1 Wireless Intercom users, I hope you're all having a great experience with your devices! I've encountered a technical issue with my M1 Intercom and would greatly appreciate your insights and advice. Issue Description: My M1 W ...
The tutorial video for the new Solidcom C1 Pro, 1,100ft (350m) Full-Duplex ENC Wireless Intercom Headset System! Next-Level Team Talk! The Solidcom C1 Pro is the first full-duplex wireless dual-mic Environmental Noise Cancellation (ENC) intercom sy ...
4 sets (HUB version or without HUB version) in maximum at the same range in 350 meters. The installations:a. The distance between two hubs is at least 1.5 meters when multiple Solidcom C1 Pro hub-based systems are cascaded. b. You are advised to in ...
