Welcome to the Hollyland Forum!

Edited by Hollyland Forum admin at 2023-9-14 15:06 Welcome to the Hollyland Forum! On behalf of the Hollyland Team, we would like to welcome you to the Hollyland Forum. In this forum you will find great information from other forum members an ...

Meu receptor do lark max fora da caixa não está pareando com nenhum dos dois transmissores, já tentei fazer downgrade e upgrade do firmware e nada funcionou, ele segue sem parear com os microfones, não sei mais o que fazer. Quando coloco na Cas ...

I currently have the Lark M2 Combo set with the camera receiver and 2 button mics. If I buy a second set of Mics can I connect them to the one camera receiver giving me 4 mics connected to my camera? I've read that there are limitations with the USB ...

My Mac doesn't read Hollyland Lark Max when I connect it to the computer to access the files recorded on the mcirophones. I've already tried connecting the transmitter and the microphones themselves via USB-C, but I was unsuccessful. I also tried ...

hello everyones if i connect the transmittter (micro with stuff in it) directly to the iphone, i can't see it (should appear as a storage media). my next question is about to update the box. it does'n work. i can't open the programm on my mac. someb ...

I just recently purchased a Lark M2 set for use in our church. I use the camera receiver unit connected to an XLR input on our sound board (with the purchase of a dongle to go from the mini-jack to XLR) to get the two mics into the house PA system. M ...

Greeting everyone. I just purchased the Lark Max mic set and really like it a lot. I would like to tweak some of the receiver parameters. I installed the LarkSound app onto my MacBook and also my iPad. My mics are both turned on and have been paire ...

I just bought my Hollyland Lark M1, and I need to use it next week to record two people having a conversation while standing on a busy New York street. How do I make sure both mics are on? How do I make sure they’re both at the correct audio leve ...

I am a professional soundengineer, and audio is essential to my work. Before the Lark Max appeared, Iused the DJI and the Rode Wireless Go II. They have quite similar features. Why do I love this setthat's not as famous as DJI or Rode? Great sound q ...

Yes, each transmitter is supported with 8GB of built-in storage, capable of up to 14-hour audio recording.

If we put the hollyland microphones inside the charging dock, will their batteries be damaged?

Hello All... I have Lark C1 type C for android now, but recently I bought sony camera ZVe10,, Can I use my Lark C1 to my sony camera? Any converter for it, coz I dont wanna spent more for new Mic... if any way to connect it pls let me know... Tha ...

"First of all, greetings to everyone. It's truly exciting to explore and experience Hollyland products, which contain innovative products and technologies. I believe that you share the same sentiment. 🫠"

Q: What Should I Do If There Is Noise When the Lark M1 Is Connected to an Android Phone? A: The audio interface performance and parameters of different Android phones are different, and it may have some circuit noise when an analog cable is used. It ...

Hello Hollyland forum,I hope you can help me.I bought the Lark C1 to easily record podcasts on the go and I have a question.Although both microphones are recognized separately by the receiver, they are combined into a single signal.Is there a way to ...

Hi. I bought a lark max. It did not come with a neck strap. Where can I get one?

My friend has the Lark M1 microphone. And he's always been bragging about how convenient it is. I was going to get one as well. But thank God! This Lark Max came out just in time! M1 is great for beginners but I always want more, like the 3.5mm, touc ...

[*]The Lark M1 has three volume levels: high, medium, and low, with the default volume level being medium. The volume can be increased to the maximum by pressing the "+" button twice on the receiver. [*]You can also adjust the recording volume by ad ...

Stereo Mode: The left track of the RX ouputs the audios from the TX1 while the right track outputs the audios from the TX2, the audios from different tracks are different. If you prefer recording audios from different sourcces so that each audio file ...

Connection to cameras using the 3.5mm TRS to 3.5mm TRS cable: [*]Connect the receiver to a camera using the 3.5mm TRS to 3.5mm TRS cable. [*]Plug the cable into the microphone interface on the camera instead of the monitoring interface. [*]The reco ...

Connection to Android phones using the USB-C to USB-C cable: [*]Connect the receiver to an Android phone with a USB-C interface using the USB-C to USB-C cable. [*]Perform audio settings on the mobile phone. The audio device must be set to External ...